Protocol analysis
R&S
®
RTE
725User Manual 1326.1032.02 ─ 20
Type
Selects the search type for 100BASE-T1 analysis.
Remote command:
SEARch:TRIGger:HBTO:TYPE on page 1689
Frame Start ← Type
Searches for the start of frame.
MAC Frame ← Type
Searches for a Media Access Control (MAC) frame that matches the specified Destina-
tion address, Source address, Length/Type, Frame check, Data or Index condition.
The frame contains addresses of the devices and MAC control information that define
how to go about transmitting and receiving frames.
Ethernet 100BASE-T1 (option R&S RTE-57)
To Next Page
Loading...
