Rohde & Schwarz RTE - Page 897

Protocol analysis
R&S
®
RTE
897User Manual 1326.1032.02 ─ 20
Table 13-30: Content of the "Decode results details" table
Column Description
Type Type (name) of field
Numeric value The numeric value of the field
Status Status of the field: OK or error
Zooming on decoded results
The zoom functions allow you to analyze the decode results in more detail. If "Zoom
coupling" is enabled, the decode zoom and result table are synchronized; if you select
a row in the result table, this result is shown in the decode zoom.
For an introduction to zoom settings and setup, see:
●
Chapter 7.1.2, "Zoom settings", on page 280
●
Chapter 7.1.3, "Zooming for details", on page 284
Data format
You can select various data formats for the values displayed in the decode table and in
the combs of the decoded signal.
Remote command:
●
BUS<m>:FORMat on page 1422
Export of decode results
1. In the protocol decode table, press "Export".
The "Numeric Results" dialog opens.
For details, see Chapter 12.2.4, "Numeric Results", on page 492.
2. Select the decode results you want to export, the file format, and the delimiter.
3. Tap "Save" or "Save as".
Remote commands
Remote commands are described in Chapter 18.17.20.3, "Decode results",
on page 1885.
CXPI (option R&S RTE-K76)