Rohde & Schwarz RTE - Page 927

Waveform generator (Option R&S RTE-B6)
R&S
®
RTE
927User Manual 1326.1032.02 ─ 20
"Sine"
Generates a sine wave. You can set its Frequency and Period.
"Square"
Generates a square wave. You can set its Frequency, Period and
Duty cycle.
"Ramp"
Generates a ramp signal. You can set its Frequency, Period and
Symmetry.
"DC"
Generates a direct current (DC) signal. You can set the "Level"
on page 942.
Setup of the waveform generator