TC1796
System Units (Vol. 1 of 2)
Program Memory Unit
User’s Manual 7-17 V2.0, 2007-07
PMU, V2.0
1. Write AFE0 55F0
H
= word 0 (assembly buffer byte 3-0)
2. Write AFE0 55F4
H
= word 1 (assembly buffer byte 7-4)
3. Write AFE0 55F0
H
= word 2 (assembly buffer byte 11-8)
4. Write AFE0 55F4
H
= word 3 (assembly buffer byte 15-12)
…
1. Write AFE0 55F0
H
= word 30 (assembly buffer byte 123-120)
2. Write AFE0 55F4
H
= word 31 (assembly buffer byte 127-124)
Sequence errors (bit FSR.SQER set) are generated by a Load Page Buffer command in
the following cases:
• A mix of 64-bit and 32-bit write data width within one assembly buffer filling sequence
has been detected.
• An assembly buffer overrun condition is detected. The write data causing the overrun
is lost.
To Next Page
Loading...
Need help?
General