Rohde & Schwarz RTE - Page 1284

Remote control commands
R&S
®
RTE
1284User Manual 1326.1032.02 ─ 20
<MeasType>
parameter value
(remote control)
Measurement
(manual opera-
tion)
Description/Result Suffix
<n>
MKPositive Marker + Probabil-
ity %
Marker value (according to the selected probability
domain marker type) plus the defined limit.
Note that the value is restricted to the histogram
range.
17
MKNegative Marker - Probability
%
Marker value (according to the selected probability
domain marker type) minus the defined limit.
Note that the value is restricted to the histogram
range.
18
MEASurement<m>:HISTogram:SELect.......................................................................... 1284
MEASurement<m>:HISTogram:PROBability:TYPE..........................................................1284
MEASurement<m>:HISTogram:PROBability:LIMit........................................................... 1285
MEASurement<m>:HISTogram:LCHeck<n>:VALid.......................................................... 1285
MEASurement<m>:HISTogram:LCHeck<n>:LOWer:LIMit.................................................1286
MEASurement<m>:HISTogram:LCHeck<n>:UPPer:LIMit................................................. 1286
MEASurement<m>:HISTogram:LCHeck<n>:LOWer:MARGin........................................... 1286
MEASurement<m>:HISTogram:LCHeck<n>:UPPer:MARGin............................................1286
MEASurement<m>:HISTogram:SELect <HistgRef>
Selects the histogram on which the measurement is based.
Suffix:
<m>
.
1..10
See "Selection of the measurement: MEASurement<m>"
on page 1249.
Parameters:
<HistgRef> String with the name of the histogram
Example: See "Creating and reading histograms" on page 1058
Usage: Asynchronous command
MEASurement<m>:HISTogram:PROBability:TYPE <HistgPrbDomMark>
Defines the marker reference in the probability domain.
Suffix:
<m>
.
1..10
See "Selection of the measurement: MEASurement<m>"
on page 1249.
Parameters:
<HistgPrbDomMark> PEAK | UPPK | LWPK | MAXimum | MINimum | MEDian | MEAN
PEAK
The y-value with the maximum sample value in the histogram
Automatic measurements