Rohde & Schwarz RTE - Page 148

Instrument setup
R&S
®
RTE
148User Manual 1326.1032.02 ─ 20
On the "Diagram Layout" tab, you define the elements to be shown in the diagrams,
and the position of result boxes.
These settings are user-specific, they are not reset by [PRESET] and *RST. You can
reset them to default values using [FILE] > "Save/Recall > User defined preset > Fac-
tory defaults" or using the SYSTem:PRESet command.
The diagrams and tabs are created and arranged with drag&drop and the SmartGrid,
see Chapter 3.4.5, "Rohde & Schwarz smartgrid", on page 114.
Show grid.................................................................................................................... 148
Show labels.................................................................................................................149
Show div label (x)........................................................................................................149
Show fine grid scale....................................................................................................149
Show crosshair............................................................................................................149
Keep Y-grid fixed.........................................................................................................149
Keep X-grid fixed.........................................................................................................149
Show tabs always....................................................................................................... 149
Show evaluation gate(s) in zoom................................................................................150
Gate symbol transparency.......................................................................................... 150
Search result gate symbol color..................................................................................150
Search result line color................................................................................................150
Result position.............................................................................................................150
Show grid
If selected, a grid is displayed in the diagram area. A grid helps you associate a spe-
cific data point to its exact value on the x- or y-axis.
Remote command:
DISPlay:DIAGram:GRID on page 1098
Display configuration