Infineon Technologies TC1796 User Manual

TC1796
Peripheral Units (Vol. 2 of 2)
Controller Area Network (MultiCAN) Controller
User’s Manual 22-65 V2.0, 2007-07
MultiCAN, V2.0
05
H
Argument:
Destination Object
Number
Result:
Bit 7: ERR
Bit 6-0: undefined
Result:
Object
Number of
inserted
object
Dynamic Insert Before
Insert a new message object before a
given destination object. The new object
is taken from the list of unallocated
elements (the first element is chosen).
The number of the new object is
delivered as a result to PANAR1.
An ERR bit (bit 7 of PANAR2) reports the
success of the operation:
0
B
Success.
1
B
The operation has not been
performed because the list of
unallocated elements was empty.
06
H
Argument:
Destination Object
Number
Argument:
Source
Object
Number
Static Insert Behind
Remove a message object (source
object) from the list that it currently
belongs to, and insert it behind a given
destination object into the list structure of
the destination object.
The source object thus becomes the
successor of the destination object.
07
H
Argument:
Destination Object
Number
Result:
Bit 7: ERR
Bit 6-0: undefined
Result:
Object
Number of
inserted
object
Dynamic Insert Behind
Insert a new message object behind a
given destination object. The new object
is taken from the list of unallocated
elements (the first element is chosen).
The number of the new object is
delivered as result to PANAR1.
An ERR bit (bit 7 of PANAR2) reports the
success of the operation:
0
B
Success.
1
B
The operation has not been
performed because the list of
unallocated elements was empty.
08
H
- FF
H
––Reserved
Table 22-6 Panel Commands (cont’d)
PANCMD PANAR2 PANAR1 Command Description

Infineon Technologies TC1796 Specifications

General

Brand	Infineon Technologies
Model	TC1796
Category	Controller
Language	English