EasyManua.ls Logo

Infineon Technologies TC1796 - Page 1605

Infineon Technologies TC1796
2150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TC1796
Peripheral Units (Vol. 2 of 2)
Micro Link Interface (MLI)
User’s Manual 23-96 V2.0, 2007-07
MLI, V2.0
AP [15:6] rh Address Prediction Factor
This bit field indicates the delta value (positive or
negative number) of offset address used by the MLI
transmitter for the next address prediction. AP is a
signed 9-bit number (10th bit is the sign bit) that is written
with each transmitter address prediction calculation (see
Page 23-24 and Page 23-45).
OP 16 rh Use Optimized Frame
When address optimization is enabled with
TCR.NO = 0, this bit indicates if address prediction is
possible in the transmitter. OP is written with each
transmitter address prediction calculation (see
Page 23-24 and Page 23-45).
0
B
No address prediction is possible. A Write Offset
and Data Frame or a Discrete Read Frame are
used for transmission.
1
B
Address prediction is possible. An Optimized
Write Frame or an Optimized Read Frame are
used for transmission.
0 [31:17] r Reserved
Read as 0; should be written with 0.
Field Bits Type Description

Table of Contents