TC1796
Peripheral Units (Vol. 2 of 2)
General Purpose Timer Array (GPTA)
User’s Manual 24-119 V2.0, 2007-07
GPTA, V2.0
Variables
Input, Local, Output variables of the cell (I, L, O)
Name k = [0 to 5] for FPC
m = [0 to 5] for Signal
n = [0 to 3] for Clock
Short
Name
(*)FPC
Used
(ILO)
Comment
FPCk.Signal_Input[m] *SINm I Signal input selected by
FPCk.Input_Source
FPCk.Filter_Clock[n] *CINn I Filter Clock selected by
FPCk.Clock_Source
FPCk.Rising_Edge *RE L Signal coming from the edge
detect
FPCk.Falling_Edge *FE L Signal coming from the edge
detect
FPCk.Signal_Filtered *SF L Filtered output signal (after delay
time), initialized to 0 at reset
FPCk.Signal_Output.Transition
FPCk.Signal_Output.Level
*SOTk
*SOLk
O Transition/Level of the output
signal, initialized to 0 at reset
To Next Page
Loading...