TC1796
Peripheral Units (Vol. 2 of 2)
Analog-to-Digital Converter (ADC)
User’s Manual 25-61 V2.0, 2007-07
ADC, V2.0
GRPS 14 rw Analog Input Multiplexer Group Select
This bit selects the analog input multiplexer group for
analog input channel n.
0
B
Analog input multiplexer group 0 selected. Analog
inputs AIN[15:0] are assigned to analog input
channels [15:0].
1
B
Analog input multiplexer group 1 selected. Analog
inputs AIN[31:16] are assigned to analog input
channels [15:0].
BSELA,
BSELB
[17:16],
[19:18]
rw Boundary Select Control
This bit selects two limit check control registers for limit
checking.
00
B
LCCON0 (BOUNDARY0) is selected
01
B
LCCON1 (BOUNDARY1) is selected
10
B
LCCON2 (BOUNDARY2) is selected
11
B
LCCON3 (BOUNDARY3) is selected
LCC [22:20] rw Limit Check Control
000
B
Neither limit check is performed nor a service
request is generated on write of the conversion
result to bit field STAT.RESULT.
001
B
Generate a service request if conversion result is in
not area I.
010
B
Generate a service request if conversion result is
not in area II.
011
B
Generate a service request if conversion result is
not in area III.
100
B
Generate a service request on write of conversion
result to bit field STAT.RESULT.
101
B
Generate a service request result if conversion
result is in area I.
110
B
Generate a service request result if conversion
result is in area II.
111
B
Generate a service request result if conversion
result is in area III.
Field Bits Type Description
To Next Page
Loading...
Need help?
General