TC1796
System Units (Vol. 1 of 2)
Direct Memory Access Controller
User’s Manual 12-61 V2.0, 2007-07
DMA, V2.0
FPI1ER 21 rh RPB Error
This bit is set whenever a move that has been started by
the DMA/MLI master interface on FPI Bus interface 1
leads to an error.
0
B
No error occurred.
1
B
An error occurred on FPI Bus interface 1.
LECME0 [26:24] rh Last Error Channel Move Engine 0
This bit field indicates the channel number of the last
channel of Move Engine 0 leading to an FPI Bus error
that has occurred.
MLI0 27 rh MLI0 Error Source
This bit is set whenever an FPI Bus error occurred due
to an action of MLI0.
0
B
No FPI error occurred due to MLI0.
1
B
An FPI error occurred due to MLI0.
LECME1 [30:28] rh Last Error Channel Move Engine 1
This bit field indicates the channel number of the last
channel of Move Engine 1 leading to an FPI Bus error
that has occurred.
MLI1 31 rh MLI1 Error Source
This bit is set whenever an FPI Bus error occurred due
to an action of MLI1.
0
B
No FPI error occurred due to MLI1.
1
B
An FPI error occurred due to MLI1.
0 [23:22] r Reserved
Read as 0; should be written with 0.
Field Bits Type Description
To Next Page
Loading...