Remote control commands
R&S
®
RTE
1745User Manual 1326.1032.02 ─ 20
Parameters:
<BitCount> Range: 1 to 64
Increment: 1
*RST: 1
BUS<m>:CMSB:FRAMe<n>:CELL<o>:CONDition <Condition>
Sets various operators for a cell, to identify, e.g., mandatory values such as a CRC
checksum or an ID, that help to identify a frame.
The implemented conditions and functionalities are the "equal" and "array" operators.
The numeric format of the condition needs to be set according to BUS<m>:CMSB:
FRAMe<n>:CELL<o>:FORMat on page 1745.
Suffix:
<m>
.
1..4
<n> *
<o> *
Parameters:
<Condition>
BUS<m>:CMSB:FRAMe<n>:CELL<o>:FORMat <CellFormat>
Selects the numeric data format for the command BUS<m>:CMSB:FRAMe<n>:
CELL<o>:CONDition on page 1745, as well as for the result and honeycomb display.
Suffix:
<m>
.
1..4
<n> *
<o> *
Parameters:
<CellFormat> DEC | HEX | OCT | BIN
DEC
Decimal
HEX
Hexadecimal
OCT
Octal
BIN
Binary
*RST: BIN
Protocols
To Next Page
Loading...
