TC1796
Peripheral Units (Vol. 2 of 2)
Controller Area Network (MultiCAN) Controller
User’s Manual 22-187 V2.0, 2007-07
MultiCAN, V2.0
TTERIE 3rwTransmit Trigger Error Interrupt Enable
TTERIE enables the transmit trigger error interrupt.
This interrupt is generated when TTIRR.TTOF or
TTIRR.TTUF become set (independent of its current
state).
0
B
Transmit trigger error interrupt is disabled.
1
B
Transmit trigger error interrupt is enabled.
Bit field TTINPR.ERRINP selects the interrupt output
line that becomes activated at this type of interrupt.
WTEIE 6rwWatch Trigger Event Interrupt Enable
WREIE enables the watch trigger event interrupt.
This interrupt is generated when TTIRR.IWTE or
TTIRR.WTE become set (independent of its current
state).
0
B
Watch trigger event interrupt is disabled.
1
B
Watch trigger event interrupt is enabled.
Bit field TTINPR.ERRINP selects the interrupt output
line that becomes activated at this type of interrupt.
AWDIE 7rwApplication Watchdog Interrupt Enable
AWDIE enables the application watchdog interrupt.
This interrupt is generated when TTIRR.AWDERR
becomes set (independent of its current state).
0
B
Application watchdog interrupt is disabled.
1
B
Application watchdog interrupt is enabled.
Bit field TTINPR.ERRINP selects the interrupt output
line that becomes activated at this type of interrupt.
ERRSCIE 8rwError State Change Interrupt Enable
ERRSCIE enables the error state change interrupt.
This interrupt is generated when bit field
TTSR.ERRSC changes its state.
0
B
Error state change interrupt is disabled.
1
B
Error state change interrupt is enabled.
Bit field TTINPR.NOTIFINP selects the interrupt
output line that becomes activated at this type of
interrupt.
Field Bits Type Description
To Next Page
Loading...
Need help?
General