TC1796
Peripheral Units (Vol. 2 of 2)
General Purpose Timer Array (GPTA)
User’s Manual 24-185 V2.0, 2007-07
GPTA, V2.0
OIA 14 rw Output Immediate Action
0
B
No immediate action required.
1
B
Action defined by bit field OCM must be
performed immediately.
OIA is always read as 0.
OUT 15 rh Output State
0
B
LTCkOUT output line is 0.
1
B
LTCkOUT output line is 1.
0 [31:16] r Reserved
Read as 0; should be written with 0.
LTCCTRk (k = 00-62)
Local Timer Cell Control Register k [Compare Mode]
(200
H
+k*8
H
) Reset Value: 0000 0000
H
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
0
r
1514131211109876543210
OUT OIA OCM CEN SLL ILM EOA BYP SOH SOL REN OSM MOD
rh rw rw rh rh rw rwh rw rw rw rw rw rw
Field Bits Type Description
MOD [1:0] rw Mode Control Bits
00
B
LTCk operates in Capture Mode.
01
B
LTCk operates in Compare Mode.
10
B
LTCk operates in Free-Running Timer Mode.
11
B
LTCk operates in Reset Timer Mode.
OSM 2rwOne Shot Mode Enable
0
B
LTCk is continuously enabled.
1
B
LTCk is enabled for one event only.
Field Bits Type Description
To Next Page
Loading...