Rohde & Schwarz RTE - Page 892

Protocol analysis
R&S
®
RTE
892User Manual 1326.1032.02 ─ 20
Frame ID
Searches for a frame identifier pattern or a frame identifier range. The setup consists of
the condition and one or two frame patterns.
The frame identifier setup settings are the same as in the CXPI trigger setup, see
"Frame ID" on page 887.
Remote command:
SEARch:TRIGger:CXPI:FID:CONDition on page 1894
SEARch:TRIGger:CXPI:FID:MAX on page 1895
SEARch:TRIGger:CXPI:FID:MIN on page 1895
DLC
Searches for a DLC pattern or a DLC range. The setup consists of the condition and
one or two DLC patterns.
The DLC setup settings are the same as in the CXPI trigger setup, see "DLC"
on page 888.
Remote command:
SEARch:TRIGger:CXPI:DLC:CONDition on page 1892
SEARch:TRIGger:CXPI:DLC:MAX on page 1892
SEARch:TRIGger:CXPI:DLC:MIN on page 1892
DLC Extend
Searches for a DLC extend pattern or a DLC extend range. The setup consists of the
condition and one or two DLC extend patterns.
The DLC extend setup settings are the same as in the CXPI trigger setup, see "DLC
Extend" on page 888.
Remote command:
SEARch:TRIGger:CXPI:DEXTension:CONDition on page 1891
SEARch:TRIGger:CXPI:DEXTension:MAX on page 1891
SEARch:TRIGger:CXPI:DEXTension:MIN on page 1892
Data
Searches for a data pattern or a data range. The setup consists of the condition and
one or two data patterns.
The data setup settings are the same as in the CXPI trigger setup, see "Data"
on page 888.
Remote command:
SEARch:TRIGger:CXPI:DATA:DCONdition on page 1889
SEARch:TRIGger:CXPI:DATA:DMAX on page 1889
SEARch:TRIGger:CXPI:DATA:DMIN on page 1890
Index
Searches for a data index pattern or a data index range. The setup consists of the con-
dition and one or two index patterns.
The index setup settings are the same as in the CXPI trigger setup, see "Index"
on page 889.
CXPI (option R&S
RTE-K76)