www.ti.com
Instruction Set
1117
SPNU563A–March 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
High-End Timer (N2HET) Module
Table 23-91. Comparison Type Encoding Format
comp_mode C[6] C[5] MCMP Order
ECMP 0 0
SCMP 0 1
MCMP1 1 0 REG_GE_DATA
MCMP2 1 1 DATA_GE_REG
Table 23-92. RADM64 Control Field Descriptions
request Maintains the control field for the remote instruction.
Control Maintains the control field for the remote instruction.
en_pin_action Maintains the control field for the remote instruction.
cond_addr Maintains the control field for the remote instruction.
pin Maintains the control field for the remote instruction.
register Maintains the control field for the remote instruction.
action Maintains the control field for the remote instruction.
irq Maintains the control field for the remote instruction.
data Specifies the 25-bit initial value for the data field. If omitted, the field defaults to 0.
hr_data
Seven least significant bits of the 32-bit data field.
Default: 0.
cntl_val Specifies the 29 least significant bits of the Control field.
Execution
Remote Data Field = Selected register + Immediate Data Field (including HR field);
Remote Control Field = Immediate Control Field;
Jump to Next Program Address;
To Next Page
Loading...
Need help?
General
