Texas Instruments TMS570LC4357 User Manual

DCAN Control Registers www.ti.com
1458
SPNU563A–March 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Controller Area Network (DCAN) Module
Table 27-7. CAN Control Register (DCAN CTL) Field Descriptions (continued)
Bit Field Value Description
3 EIE Error interrupt enable.
0 Disabled. PER, BOff, and EWarn bits cannot generate an interrupt.
1 Enabled. PER, BOff, and EWarn bits can generate an interrupt at DCAN0INT line and affect the
Interrupt Register.
2 SIE Status change interrupt enable.
0 Disabled. WakeUpPnd, RxOk, TxOk, and LEC bits cannot generate an interrupt.
1 Enabled. WakeUpPnd, RxOk, TxOk, and LEC can generate an interrupt at DCAN0INT line and
affect the Interrupt Register.
1 IE0 Interrupt line 0 enable.
0 Disabled. Module Interrupt DCAN0INT is always low.
1 Enabled. Interrupts will assert line DCAN0INT to one; line remains active until pending
interrupts are processed.
0 Init Initialization
0 Normal operation.
1 Initialization mode is entered.

Texas Instruments TMS570LC4357 Specifications

General

Brand	Texas Instruments
Model	TMS570LC4357
Category	Microcontrollers
Language	English