System and Peripheral Control Registers
www.ti.com
216
SPNU563A–March 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Architecture
2.5.2.13 Die Identification Register Upper Word (DIEIDH_REG3)
This register is shown in Figure 2-71 and described in Table 2-84.
Figure 2-71. Die Identification Register, Upper Word (DIEIDH_REG3) [offset = FCh]
31 0
DIEIDH2
R-X
LEGEND: R = Read only; X = value is unchanged after reset ; -n = value after reset
Table 2-84. Die Identification Register, Upper Word (DIEIDH_REG3) Field Descriptions
Bit Field Value Description
31-0 DIEIDH2(127-96) 0-FFFF FFFFh This read-only register contains the upper word (127:97) of the die ID information. The
contents of this register is reserved.
To Next Page
Loading...
Need help?
General
