Texas Instruments TMS570LC4357

www.ti.com FlexRay Module Registers
1347
SPNU563A–March 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
FlexRay Module
Table 26-98. Error Interrupt Line Select Register (EILS) Field Descriptions (continued)
Bit Field Value Description
7 RFOL Receive FIFO overrun interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.
6 UCREL Uncorrectable RAM error interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.
5 CCLL CHI command locked interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.
4 CCFL Clock correction failure interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.
3 SFOL Sync frame overflow interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.
2 SFBML Sync frames below minimum interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.
1 CNAL Command not accepted interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.
0 PEMCL POC error mode changed interrupt line.
0 Interrupt is assigned to interrupt line CC_int0.
1 Interrupt is assigned to interrupt line CC_int1.