Enterasys C3G124-24 - Example of VLAN Propagation Via GVRP; Commands; Purpose

Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
Enterasys C3 Configuration Guide 14-21
Figure 14-1 Example of VLAN Propagation via GVRP
Purpose
To dynamically create VLANs across a switched network. The GVRP command set is used to
display GVRP configuration information, the current global GVRP state setting, individual port
settings (enable or disable) and timer settings. By default, GVRP is enabled globally on the device,
but disabled on all ports.
Commands
End
Station A
Switch 4
Switch 5
= Port registered as a member of VLAN Blue
= Port declaring VLAN Blue
D
R
1
1
2
3
D
R
D
Switch 1
1
R
R
3
Switch 2
12
D
R
D
Switch 3
1
R
For information about... Refer to page...
show gvrp 14-22
show garp timer 14-22
set gvrp 14-23
clear gvrp 14-24
set garp timer 14-24
clear garp timer 14-25