Enterasys C3G124-24 User Manual

set lldp port tx-tlv
10-28 Discovery Protocol Configuration
set lldp port tx-tlv
Use this command to select the optional LLDP and LLDP-MED TLVs to be transmitted in
LLDPDUs by the specified port or ports. Use the show lldp port local-info command to display
the values of these TLVs for the port.
Syntax
set lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap] [mgmt-
addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr] [max-frame] [med-
cap] [med-pol] [med-loc] [med-poe]} port-string
Parameters
all Adds all optional TLVs to transmitted LLDPDUs.
port-desc Port Description optional basic LLDP TLV. Value sent is ifDescr object
defined in RFC 2863.
sys-name System Name optional basic LLDP TLV. Value sent is the
administratively assigned name for the system.
sys-desc System Description optional basic LLDP TLV. Value sent is sysDescr
object defined in RFC 3418.
sys-cap System Capabilities optional basic LLDP TLV. For a network
connectivity device, value sent can be bridge and/or router.
mgmt-addr Management Address optional basic LLDP TLV. Value sent is IPv4
address of host interface.
vlan-id Port VLAN ID IEEE 802.1 Extensions TLV. Value sent is port VLAN
ID (PVID).
stp Spanning Tree information defined by Protocol Identity IEEE 802.1
Extensions TLV. If STP is enabled on the port, value sent includes
version of protocol being used.
lacp LACP information defined by Protocol Identity IEEE 802.1
Extensions TLV. If LACP is enabled on the port, value sent includes
version of protocol being used.
gvrp GVRP information defined by Protocol Identity IEEE 802.1
Extensions TLV. If LACP is enabled on the port, value sent includes
version of protocol being used.
mac-phy MAC-PHY Configuration/Status IEEE 802.3 Extensions TLV. Value
sent includes the operational MAU type, duplex, and speed of the
port.
poe Power via MDI IEEE 802.3 Extensions TLV. Values sent include
whether pair selection can be controlled on port, and the power class
supplied by the port. Only valid for PoE-enabled ports.
link-aggr Link Aggregation IEEE 802.3 Extensions TLV. Values sent indicate
whether the link associated with this port can be aggregated,
whether it is currently aggregated, and if aggregated, the aggregated
port identifier.
max-frame Maximum Frame Size IEEE 802.3 Extensions TLV. Value sent
indicates maximum frame size of the port’s MAC and PHY.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English