clear ipv6 dhcp statistics
Enterasys C3 Configuration Guide 30-17
clear ipv6 dhcp statistics
This command clears IPv6 DHCP statistics, either all statistics or only for a specific interface.
Syntax
clear ipv6 dhcp statistics [vlan vlan-id]
Parameters
Defaults
If no interface is specified, IPv6 DHCP statistics for all interfaces are cleared.
Mode
Router privileged execution: C3(su)->router#
Example
This example clears DHCPv6 statistics for VLAN 80.
C3(su)->router# clear ipv6 dhcp statistics vlan 80
DHCPv6 Decline Packets Received Number of decline received statistics.
DHCPv6 Inform Packets Received Number of inform received statistics.
DHCPv6 Relay-forward Packets
Received
Number of relay forward received statistics.
DHCPv6 Relay-reply Packets
Received
Number of relay-reply received statistics.
DHCPv6 Malformed Packets Received Number of malformed packets statistics.
Received DHCPv6 Packets Discarded Number of DHCP discarded statistics.
Total DHCPv6 Packets Received Total number of DHCPv6 received statistics.
DHCPv6 Advertisement Packets
Transmitted
Number of advertise sent statistics.
DHCPv6 Reply Packets Transmitted Number of reply sent statistics.
DHCPv6 Reconfig Packets
Transmitted
Number of reconfigure sent statistics.
DHCPv6 Relay-reply Packets
Transmitted
Number of relay-reply sent statistics.
DHCPv6 Relay-forward Packets
Transmitted
Number of relay-forward sent statistics.
Total DHCPv6 Packets Transmitted Total number of DHCPv6 sent statistics.
Table 30-2 Output of show ipv6 dhcp statistics Command (Continued)
Output... What it displays...
vlan vlan-id (Optional) Specifies the interface for which to clear DHCPv6 statistics.
To Next Page
Loading...
