Enterasys C3G124-24 - Show Maclock

show maclock
32-62 Authentication and Authorization Configuration
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [port-string]
Parameters
Defaults
If port-string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read-only.
set maclock enable 32-65
set maclock disable 32-65
set maclock 32-66
clear maclock 32-67
set maclock static 32-67
clear maclock static 32-68
set maclock firstarrival 32-68
clear maclock firstarrival 32-69
set maclock agefirstarrival 32-70
clear maclock agefirstarrival 32-70
set maclock clearonlinkchange 32-71
clear maclock clearonlinkchange 32-71
set maclock move 32-72
set maclock trap 32-72
set maclock syslog 32-73
set maclock disable-port 32-74
clear maclock disable-port 32-75
clear maclock violation disabled-port 32-75
For information about... Refer to page...
port-string (Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port-string values, refer to “Port String
Syntax Used in the CLI” on page 11-1.