Enterasys C3G124-24 User Manual

clear logging interface Configuring System Logging
Enterasys C3 Configuration Guide 19-15
vlan 100 192.168.10.1
clear logging interface
Use this command to clear the interface used for the source IP address of the system logging back
to the default of the Host interface.
Syntax
clear logging interface
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Example
This command returns the interface used for the source IP address of the system logging back to
the default of the Host interface.
C3(rw)->show logging interface
vlan 100 192.168.10.1
C3(rw)->clear logging interface
C3(rw)->

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English