Enterasys C3G124-24 - Clear Config; Show Reset

show reset
Enterasys C3 Configuration Guide 3-49
Example
This example shows how to schedule a reset in 5 hours and 20 minutes.
C3(su)->reset in 05:20
Reset scheduled in 5 hours and 20 minutes
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 19:56:01, MON NOV 14 2011 (in 5 hours 20 minutes)
show reset
Use this command to display information about scheduled device resets.
Syntax
show reset
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Example
This example shows how to display reset information.
C3(su)->show reset
Reset scheduled for MON NOV 14 2011, 23:00:00 (in 0 days 5 hours 57 minutes 51
seconds).
Reset reason: testing
clear config
Use this command to clear the user-defined configuration parameters.
Syntax
clear config [all]
Parameters
Defaults
If all is not specified, stacking configuration parameters will not be cleared.
Mode
Switch command, read-write, if security profile = normal.
all (Optional) Clears user-defined configuration parameters (and stack unit
numbers and priorities, if applicable).