Enterasys C3G124-24 User Manual

clear dhcp pool netbios-node-type
22-28 DHCP Server Configuration
clear dhcp pool netbios-node-type
Use this command to remove the NetBIOS node type from the address pool being configured.
Syntax
clear dhcp pool poolname netbios-node-type
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example removes the NetBIOS node type from the address pool “auto1.”
C3(rw)->clear dhcp pool auto1 netbios-node-type
set dhcp pool option
Use this command to configure DHCP options, described in RFC 2132.
Syntax
set dhcp pool poolname option code {ascii string | hex string-list | ip address-
list}
Parameters
Defaults
None.
Mode
Switch command, read-write.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
code Specifies the DHCP option code, as defined in RFC 2132. Value can range
from 1 to 254.
ascii string Specifies the data in ASCII format. An ASCII character string containing a
space must be enclosed in quotations.
hex string-list Specifies the data in HEX format. Up to 8 HEX strings can be entered.
ip address-list Specifies the data in IP address format. Up to 8 IP addresses can be entered.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English