Enterasys C3G124-24 - Show Switch Switchtype

show switch switchtype
Enterasys C3 Configuration Guide 2-7
Configured Switch:
Model Identifier C3G124-24
Description Enterasys Networks, Inc. C3 -- Model
C3G124-24
show switch switchtype
Use this command to display information about supported switch types in the stack.
Syntax
show switch switchtype [switchindex]
Parameters
Defaults
None.
Mode
Switch command, read-only.
Examples
This example shows how to display switch type information about all switches in the stack:
C3(ro)->show switch switchtype
Mgmt Code
SID Switch Model ID Pref Version
--- -------------------------------- ---- ---------
1 C2G124-24 1 0xa08245
2 C2K122-24 1 0xa08245
3 C2G124-48 1 0xa08245
4 C2G124-48P 1 0xa08245
5 C2H124-48 1 0xa08245
6 C2H124-48P 1 0xa08245
7 C2G134-24P 1 0xa08245
8 C2G170-24 1 0xa08245
9 C3G124-24P 1 0xa08245
10 C3G124-48P 1 0xa08245
11 C3G124-48 1 0xa08245
12 C3G124-24 1 0xa08245
13 C3K172-24 1 0xa08245
15 C3K122-24 1 0xa08245
17 C3K122-24P 1 0xa08245
This example shows how to display switch type information about SID1:
C3(ro)->show switch switchtype 1
Switch Type 0x56950200
Model Identifier C2G124-24
Switch Description Enterasys Networks, Inc. C2 --
Model C2G124-24
Management Preference 1
Expected Code Version 0xa08245
switchindex (Optional) Specifies the switch index (SID) of the switch type to display.