Enterasys C3G124-24 User Manual

show multiauth station
Enterasys C3 Configuration Guide 32-47
Mode
Switch command, read-write.
Examples
This example shows how to clear the port multiple authentication mode on port ge.3.14:
C3(rw)->clear multiauth port mode ge.3.14
This example shows how to clear the number of users on port ge.3.14:
C3(rw)->clear multiauth port numusers ge.3.14
show multiauth station
Use this command to display multiple authentication station (end user) entries.
Syntax
show multiauth station [mac address] [port port-string]
Parameters
Mode
Switch command, read-only.
Defaults
If no options are specified, multiple authentication station entries will be displayed for all MAC
addresses and ports.
Example
This example shows how to display multiple authentication station entries. In this case, two end
user MAC addresses are shown:
C3(rw)->show multiauth station
Port Address type Address
------------ ------------ ------------------------
ge.1.20 mac 00-10-a4-9e-24-87
ge.2.16 mac 00-b0-d0-e5-0c-d0
show multiauth session
Use this command to display multiple authentication session entries.
Syntax
show multiauth session [all] [agent {dot1x | mac | pwa}] [mac address]
[port port-string]
mac address (Optional) Displays multiple authentication station entries for a specific
MAC address.
port port-string (Optional) Displays multiple authentication station entries for one or more
ports.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English