Enterasys C3G124-24 - Show Ip Pimsm Staticrp

show ip pimsm staticrp
27-46 IPv4 Advanced Routing Protocol Configuration
Parameters
Defaults
None.
Mode
Any router mode.
Example
This example shows how to display RP that will be selected for group address 224.0.0.0:
C3(su)->router> show ip pimsm rphash 224.0.0.0
192.168.129.223
show ip pimsm staticrp
Display the PIM-SM static Rendezvous Point information.
Syntax
show ip pimsm staticrp
Parameters
None.
Mode
Any router mode.
Defaults
None.
Example
This example shows how to display PIM information.
C3(su)->router# show ip pimsm staticrp
STATIC RP TABLE
Address Group Address Group Mask
--------------- --------------- ---------------
123.231.111.121 234.0.0.0 255.0.0.0
192.168.129.223 224.0.0.0 240.0.0.0
Table 27-13 provides an explanation of the command output.
group-address The Group Address for the RP.