save config
Enterasys C3 Configuration Guide 3-37
save config
Use this command to save the running configuration. If applicable, this command will save the
configuration to all switch members in a stack.
Syntax
save config
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to save the running configuration:
C3(su)->save config
dir
Use this command to list configuration and image files stored in the file system.
Syntax
dir [filename]
Parameters
Defaults
If filename is not specified, all files in the system will be displayed.
Mode
Switch command, read-only.
Usage
The “secure” directory is only visible to and accessible by super-user accounts. Super-users can
create, edit, and delete files in the secure directory, and can copy files to and from the secure
directory. Up to 10 files are allowed in the secure directory, with a total size of 512 KB.
The secure.log file stored in the “secure/logs” directory cannot be deleted, edited, or renamed.
Super-users can copy the secure.log file using SCP, SFTP. or TFTP. Refer to “About Security Audit
Logging” on page 19-1 for more information about the secure.log file.
filename (Optional) Specifies the file name or directory to list.
To Next Page
Loading...
Need help?
General