show maclock stations
32-64 Authentication and Authorization Configuration
show maclock stations
Use this command to display MAC locking information about end stations connected to the
switch.
Syntax
show maclock stations [firstarrival | static] [port-string]
Parameters
Defaults
If no parameters are specified, MAC locking information will be displayed for all end stations.
Mode
Switch command, read-only.
Example
This example shows how to display MAC locking information for the end stations connected to all
Gigabit Ethernet ports in unit/module 2:
C3(su)->show maclock stations ge.2.*
Port Number MAC Address Status State Aging
------------ ----------------- -------------- -------------- -----
ge.2.1 00:a0:c9:39:5c:b4 active first arrival true
ge.2.7 00:a0:c9:39:1f:11 active static false
Table 32-7 provides an explanation of the command output.
firstarrival (Optional) Displays MAC locking information about end stations first
connected to MAC locked ports.
static (Optional) Displays MAC locking information about static (management
defined) end stations connected to MAC locked ports.
port-string (Optional) Displays end station information for specified port(s). For a
detailed description of possible port-string values, refer to “Port String
Syntax Used in the CLI” on page 11-1.
Table 32-7 show maclock stations Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 11-1.
MAC address MAC address of the end station(s) locked to the port.
Status Whether the end stations are active or inactive.
State Whether the end station locked to the port is a first arrival or static connection.
Aging When true, FirstArrival MACs that have aged out of the forwarding database will be
removed for the associated port lock.
To Next Page
Loading...
