Enterasys C3G124-24 User Manual

set maclock clearonlinkchange
Enterasys C3 Configuration Guide 32-71
Mode
Switch mode, read-write.
Example
This example disables first arrival aging on port ge.1.1.
C3(su)-> clear maclock agefirstarrival ge.1.1 enable
set maclock clearonlinkchange
Use this command to manage the behavior of First Arrival MAC locking with link state change.
Syntax
set maclock clearonlinkchange port-string {enable | disable}
Parameters
Defaults
Clear on link change is enabled by default.
Mode
Switch command, read-write.
Usage
If you disable clearing of First Arrival MAC locking, First Arrival MAC addresses will be
maintained on a loss of link.
Example
This example shows how to configure a port to maintain First Arrival MAC address locks on a
port through a link state change.
C3(su)->set maclock clearonlinkchange ge.1.1 disable
clear maclock clearonlinkchange
Use this command to return the behavior of First Arrival MAC locking with link state change to its
default value of enabled.
Syntax
clear maclock clearonlinkchange port-string
Parameters
port-string Specifies the port or ports on which to apply the command.
enable | disable Enable or disable clearing of First Arrival MAC locks with a change in
link state.
port-string Specifies the port or ports on which to apply the command.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English