Enterasys C3G124-24 - Clear Mac Address

clear mac address
Enterasys C3 Configuration Guide 18-15
Parameters
Defaults
If no port-string is defined, the command will apply to all ports.
Mode
Switch command, read-write.
Example
This example configures multicast MAC address 01-01-22-33-44-55 for VLAN 24.
C3(su)->set mac multicast 01-01-22-33-44-55 24
clear mac address
Use this command to remove a multicast MAC address.
Syntax
clear mac address mac-address [vlan-id]
Parameters
Defaults
If no vlan-id is specified, the multicast MAC address is cleared from all VLANs.
Mode
Switch command, read-write.
Example
This example clears multicast MAC address 01-01-22-33-44-55 from VLAN 24.
C3(su)->clear mac address 01-01-22-33-44-55 24
mac-address Specifies the multicast MAC address. The MAC address can be
formatted as xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
vlan-id Specifies the VLAN ID containing the ports.
port-string Specifies the port or range of ports the multicast MAC address can be
learned on or flooded to.
append | clear Appends or clears the port or range of ports from the egress port list.
mac-address Specifies the multicast MAC address to be cleared. The MAC address
can be formatted as xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
vlan-id (Optional) Specifies the VLAN ID from which to clear the static
multicast MAC address.