Enterasys C3G124-24 - Clear Linkflap down; Clear Linkflap

clear linkflap down
Enterasys C3 Configuration Guide 11-31
clear linkflap down
Use this command to toggle link flap disabled ports to operational.
Syntax
clear linkflap down [port-string]
Parameters
Defaults
If port-string is not specified, all ports disabled by a link flap violation will be made operational.
Mode
Switch mode, read-write.
Example
This example shows how to make disabled port ge.1.4 operational.
C3(rw)->clear linkflap down ge.1.4
clear linkflap
Use this command to clear all link flap options and / or statistics on one or more ports.
Syntax
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Parameters
Defaults
If port-string is not specified, settings and/or statistics will be cleared on all ports.
Mode
Switch mode, read-write.
Example
This example shows how to clear all link flap options on port ge.1.4.
C3(rw)->clear linkflap all ge.1.4
port-string (Optional) Specifies the ports to make operational.
all | stats Clears all options and statistics, or clears only statistics.
parameter Clears link flap parameters.
threshold | interval |
downtime | all
Clears link flap threshold, interval, downtime or all parameters.
port-string (Optional unless parameter is specified) Specifies the port(s) on which
to clear settings.