Enterasys C3G124-24 - Area Nssa No-Redistribute; Area Nssa No-Summary

area nssa no-redistribute
Enterasys C3 Configuration Guide 31-13
Example
This example configures NSSA area 20 to advertise a default route.
C3(su)->router(Config-router)# area 20 nssa default-info-originate
area nssa no-redistribute
This command configures the NSSA area border router to not redistribute learned external routes
to the NSSA.
Syntax
area areaid no-redistribute
no area areaid no-redistribute
Parameters
Defaults
None.
Mode
Router OSPFv3 configuration: C3(su)->router(Config-router)#
Usage
Use this command to prevent redistribution of learned external routes to the NSSA by this area
border router (ABR). Use the no form of this command to enable redistribution of learned external
routes to the NSSA.
Example
This example configures the router to not redistribute learned external routes into NSSA 20.
C3(su)->router(Config-router)# area 20 no-redistribute
area nssa no-summary
This command configures the NSSA area border router to not advertise summary routes into the
NSSA.
Syntax
area areaid nssa no-summary
no area areaid nssa no-summary
Parameters
areaid Specifies the area ID in IP address format (dotted-quad) or as a decimal
value.
areaid Specifies the area ID in IP address format (dotted-quad) or as a decimal
value.