show lldp port network-policy
10-22 Discovery Protocol Configuration
Table 10-5 describes the output fields that are unique to the remote system information database.
Refer to Table 10-4 on page 19 for descriptions of the information fields that are common to both
the local and the remote system information databases.
show lldp port network-policy
Use this command to display LLDP port network policy configuration information. Network
policy information is configured using the set lldp port network-policy command.
Syntax
show lldp port network-policy {all | voice | voice-signaling | guest-voice | guest-
voice-signaling | softphone-voice | video-conferencing | streaming-video | video-
signaling} [port-string]
Parameters
Table 10-5 show lldp port remote-info Output Display
Output Field What it Displays...
Remote Port Id Displays whatever port Id information received in the LLDPDU from the remote
device. In this case, the port Id is MAC address of remote device.
Device Type Mandatory LLDP-MED Capabilities TLV. Displayed only when the port is
connected to an LLDP-MED-capable endpoint device.
Hardware Revision LLDP-MED Extensions Inventory Management TLV component.
Firmware Revision LLDP-MED Extensions Inventory Management TLV component.
Software Revision LLDP-MED Extensions Inventory Management TLV component.
Serial Number LLDP-MED Extensions Inventory Management TLV component.
Manufacturer LLDP-MED Extensions Inventory Management TLV component.
Model Number LLDP-MED Extensions Inventory Management TLV component.
Asset ID LLDP-MED Extensions Inventory Management TLV component. In the above
example, no asset ID was received from the remote device so the field is not
displayed.
all Displays information about all network policy applications.
voice Displays information about only the voice application type.
voice-signaling Displays information about only the voice signaling application
type.
guest-voice Displays information about only the guest voice application type.
guest-voice-signaling Displays information about only the guest voice signaling
application type.
softphone-voice Displays information about only the softphone voice application
type.
video-conferencing Displays information about only the video conferencing
application type.
streaming-video Displays information about only the streaming video application
type.
video-signaling Displays information about only the video signaling application
type.
To Next Page
Loading...
Need help?
General