set maclock agefirstarrival
32-70 Authentication and Authorization Configuration
Example
This example shows how to reset MAC first arrivals on ge.2.3:
C3(su)->clear maclock firstarrival ge.2.3
set maclock agefirstarrival
Use this command to enable or disable the aging of first arrival MAC addresses. When enabled,
first arrival MAC addresses that are aged out of the forwarding database will be removed from the
associated port MAC lock.
Syntax
set maclock agefirstarrival port-string {enable | disable}
Parameters
Defaults
None.
Mode
Switch mode, read-write.
Example
This example enables first arrival aging on port ge.1.1.
C3(su)-> set maclock agefirstarrival ge.1.1 enable
clear maclock agefirstarrival
Use this command to reset first arrival aging on one or more ports to its default state of disabled.
Syntax
clear maclock agefirstarrival port-string
Parameters
Defaults
None.
port-string Specifies the port(s) on which to enable or disable first arrival aging. For
a detailed description of possible port-string values, refer to “Port String
Syntax Used in the CLI” on page 11-1.
enable | disable Enable or disable first arrival aging. By default, first arrival aging is
disabled.
port-string Specifies the port(s) on which to disable first arrival aging. For a
detailed description of possible port-string values, refer to “Port String
Syntax Used in the CLI” on page 11-1.
To Next Page
Loading...
Need help?
General