show summertime
Enterasys C3 Configuration Guide 3-15
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to set the system clock to 7:50 a.m:
C3(su)->set time 7:50:00
show summertime
Use this command to display daylight savings time settings.
Syntax
show summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Example
This example shows how to display daylight savings time settings:
C3(su)->show summertime
Summertime is Enabled and set to ''
Start : SUN MAR 14 02:00:00
End : SUN NOV 7 02:00:00
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the second Sunday of March and ending at 2:00
of the first Sunday of November
[mm/dd/yyyy]
[hh:mm:ss]
Sets the time in:
month, day, year and/or
24-hour format
At least one set of time parameters must be entered.
To Next Page
Loading...
