show ipv6 dhcp interface
30-14 DHCPv6 Configuration
show ipv6 dhcp interface
This command displays DHCPv6 configuration information or DHCPv6 statistics for the specified
routing interface.
Syntax
show ipv6 dhcp interface vlan vlan-id [statistics]
Parameters
Defaults
If statistics is not specified, configuration information about the interface is displayed.
Mode
Router privileged execution: C3(su)->router#
Usage
When you display DHCPv6 configuration information, the information displayed is different
depending on whether the interface has been configured as a DHCPv6 server or relay agent.
Examples
This example displays DHCPv6 configuration information about VLAN 80, which was configured
as a DHCPv6 server.
C3(su)->router# show ipv6 dhcp interface vlan 80
IPv6 Interface Vlan 80
Mode Server
Pool Name newpool
Server Preference 5
Option Flags Rapid Commit
This example displays DHCPv6 configuration information about VLAN 10, which was configured
as a relay agent. The output fields are described in Table 30-1 on page 30-15.
C3(su)->router# show ipv6 dhcp interface vlan 10
IPv6 Interface Vlan 10
Mode Relay
Relay Address 5006:4567::100:1
Relay Interface Number
Relay Remote ID
Option Flags
Table 30-1 provides an explanation of the command output.
vlan vlan-id Specifies the ID of the routing interface for which to display DHCPv6
information.
statistics (Optional) Specifies that DHCPv6 statistics for the specified interface
should be displayed.
To Next Page
Loading...
Need help?
General