Enterasys C3 Configuration Guide 6-1
6
Management Authentication Notification
MIB Commands
This chapter provides detailed information for the management authentication notification MIB
set of commands. Management authentication notification MIB functionality includes enabling/
disabling the sending of SNMP notifications when a user login authentication event occurs for
various authentication notification types.
show mgmt-auth-notify
Use this command to display the current settings for the Management Authentication Notification
MIB.
Syntax
show mgmt-auth-notify
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Example
This example shows how to display the current settings for Management Authentication
Notifications:
For information about... Refer to page...
show mgmt-auth-notify 6-1
set mgmt-auth-notify 6-2
clear mgmt-auth-notify 6-3
Note: Ensure that SNMP is correctly configured in order to send these notifications.
To Next Page
Loading...
