Enterasys C3G124-24 - Show Tacacs; Show Tacacs Output Details

show tacacs
36-2 TACACS+ Configuration
show tacacs
Use this command to display the current TACACS+ configuration information and status.
Syntax
show tacacs [state]
Parameters
Defaults
If state is not specified, all TACACS+ configuration information will be displayed.
Mode
Switch command, Read-Only.
Example
This example shows how to display all TACACS configuration information.
C3(ro)->show tacacs
TACACS+ status:Disabled
TACACS+ session accounting state:Disabled
TACACS+ command authorization state:Disabled
TACACS+ command auccounting state:Disabled
TACACS+ single connect state:Disabled
TACACS+ service: exec
TACACS+ session authorization A-V pairs:
access-level attribute value
read-only priv-lvl 0
read-write priv-lvl 1
super-user priv-lvl 15
TACACS+ Server IP address Port Timeout
-------------- ---------- ------ -------
1 192.168.10.1 49 10
Table 36-1 provides an explanation of the command output.
state (Optional) Displays only the TACACS+ client status.
Table 36-1 show tacacs Output Details
Output... What it displays...
TACACS+ status Whether the TACACS+ client is enabled or disabled.
TACACS+ session accounting
state
Whether TACACS+ session accounting is enabled or disabled.
TACACS+ command
authorization state
Whether TACACS+ command authorization is enabled or disabled.
TACACS+ command accounting
state
Whether TACACS+ command accounting is enabled or disabled.