set macauthentication
32-32 Authentication and Authorization Configuration
set macauthentication
Use this command to globally enable or disable MAC authentication.
Syntax
set macauthentication {enable | disable}
Parameters
Mode
Switch command, read-write.
Defaults
None.
Example
This example shows how to globally enable MAC authentication:
C3(su)->set macauthentication enable
set macauthentication password
Use this command to set a MAC authentication password.
Syntax
set macauthentication password password
Parameters
Defaults
None.
Mode
Switch command, read-write.
Reauth Period Reauthentication period for this port, set using the set macauthentication
reauthperiod command described in “set macauthentication reauthperiod” on
page 32-37.
Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command described in “set
macauthentication reauthentication” on page 32-36.
Table 32-4 show macauthentication session Output Details (Continued)
Output Field What It Displays...
enable | disable Globally enables or disables MAC authentication.
password Specifies a text string MAC authentication password.
To Next Page
Loading...
Need help?
General