set pwa guestpassword
32-84 Authentication and Authorization Configuration
set pwa guestpassword
Use this command to set the guest user password for PWA networking.
Syntax
set pwa guestpassword
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Usage
PWA will use this password and the guest user name to grant network access to guests without
established login names and passwords.
Example
This example shows how to set the PWA guest user password name:
C3(su)->set pwa guestpassword
Guest Password: *********
Retype Guest Password: *********
set pwa gueststatus
Use this command to enable or disable guest networking for port web authentication.
Syntax
set pwa gueststatus {authnone | authradius | disable}
Parameters
Defaults
None.
Mode
Switch command, read-write.
authnone Enables guest networking with no authentication method.
authradius Enables guest networking with RADIUS authentication. Upon successful
authentication from RADIUS, PWA will apply the policy returned from
RADIUS to the PWA port.
disable Disables guest networking.
To Next Page
Loading...
