Enterasys C3G124-24 - Show Txqmonitor Flowcontrol; Show Txqmonitor Port

Transmit Queue Monitoring Configuration show txqmonitor flowcontrol
9-6
logging 2
ignorepause 5
disableinterface 10
show txqmonitor flowcontrol
Use this command to display the flow control information for one or more ports.
Syntax
show txqmonitor flowcontrol [port-string]
Parameters
Defaults
If no port-string is specified, flow control information for all ports is displayed.
Mode
Switch mode, read-only.
Usage
This command displays counters for transmitted and received pause frames per port.
Example
This example shows the the pause frame counts for ports 1 through 3.
C3(su)->show txqmonitor flowcontrol ge.1.1-3
port TX Pause Count RX Pause Count
-------- --------------- --------------
ge.1.1 0 0
ge.1.2 0 0
ge.1.3 0 146
show txqmonitor port
Use this command to display transmit queue monitoring information for one or more ports.
Syntax
show txqmonitor port [port-string]
Parameters
Defaults
If port-string is not specified, information for all ports is displayed.
port-string (Optional) Specifies the port or ports for which to display flow control
information.
port-string (Optional) Specifies the ports for which to display information.