clear mac algorithm
18-14 Network Management
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Example
This example shows the output of this command.
C3(su)->show mac algorithm
Mac hashing algorithm is mac-crc16-upperbits.
clear mac algorithm
Use this command to return the MAC hashing algorithm to the default value of mac-crc16-
upperbits.
Syntax
clear mac algorithm
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Example
This example resets the MAC hashing algorithm to the default value.
C3(su)->clear mac algorithm
set mac multicast
Use this command to define on what ports within a VLAN a multicast address can be dynamically
learned on, or on what ports a frame with the specified MAC address can be flooded. Also, use
this command to append ports to or clear ports from the egress ports list.
Syntax
set mac multicast mac-address vlan-id [port-string] [{append | clear} port-string]
To Next Page
Loading...
Need help?
General