clear rmon stats
Enterasys C3 Configuration Guide 21-5
Defaults
If owner is not specified, monitor will be applied.
Mode
Switch command, read-write.
Example
This example shows how to configure RMON statistics entry 2 for ge.1.20:
C3(rw)->set rmon stats 2 ge.1.20
clear rmon stats
Use this command to delete one or more RMON statistics entries.
Syntax
clear rmon stats {index-list | to-defaults}
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to delete RMON statistics entry 2:
C3(rw)->clear rmon stats 2
index-list Specifies one or more stats entries to be deleted, causing them to disappear
from any future RMON queries.
to-defaults Resets all history entries to default values. This will cause entries to
reappear in RMON queries.
To Next Page
Loading...
