Gathering Technical Support Information
Enterasys C3 Configuration Guide 3-53
Example
This example shows how to enable SSL:
C3(rw)->set ssl enabled
Gathering Technical Support Information
Purpose
To gather common technical support information.
Command
show support
Use this command to display switch information for troubleshooting.
Syntax
show support
Parameters
None.
Defaults
None.
Mode
Switch command, read-write, if security profile = normal.
Switch command, super-user, if security profile = c2
Usage
This command initiates a number of show commands to easily gather basic information from an
installed device. To use this command, set your console to capture the output to a file first, before
executing the command, since the output is extensive.
This command gathers the output from many “show” commands, including:
• show version
• show logging buffer
• show port status
• show system utilization process
• show system utilization storage
For information about... Refer to page...
show support 3-53
To Next Page
Loading...
Need help?
General