Enterasys C3G124-24 User Manual

clear port protected name
11-64 Port Configuration
Example
This example shows how to show the name of protected port group 1:
C3(ro)->show port protected name 1
Group ID Group Name
-----------------------------
1 group1
clear port protected name
Use this command to clear the name of a protected group.
Syntax
clear port protected name group-id
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to clear the name of protected port group 1:
C3(rw)->clear port protected name 1
group-id Specifies the id of the group for which to clear the name. Id can range
from 0 to 2.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English