clear maclock disable-port
Enterasys C3 Configuration Guide 32-75
clear maclock disable-port
Use this command to clear MAC locking threshold shutdown to the default condition of disabled.
Syntax
clear maclock disable-port port-string
Parameters
Defaults
None.
Mode
Switch command, read-write.
Usage
This command returns MAC lock threshold shutdown to its default, which is disabled on all ports.
Example
This example clears MAC lock threshold shutdown on ge.2.3.
C3(su)->clear maclock disable-port ge.2.3
clear maclock violation disabled-port
Use this command to clear ports disabled due to a MAC lock violation (corresponds to
etsMACLockingShutdownState).
Syntax
clear maclock violation disabled-port port-string
Parameters
Defaults
None.
Mode
Switch command, read-write.
Usage
This command will clear the operstatus down caused by a MAC lock disable-port threshold and
clear the port’s etsMacLockingShutdownState.
port-string Specifies the port or ports on which MAC lock threshold shutdown will
be disabled.
port-string Specifies the port or ports to clear.
To Next Page
Loading...
