delete
3-42 Basic Configuration
Examples
This example shows how to download an image via TFTP:
C3(su)->copy tftp://10.1.192.34/version01000 system:image
This example shows how to download a configuration file to the configs directory:
C3(su)->copy tftp://10.1.192.1/Jan1_2004.cfg configs/Jan1_2004.cfg
This example shows how to upload a configuration file from the configs directory using SFTP.
C3(su)->copy configs/Jan1_2009.cfg sftp://user:passwd@10.1.192.1/Jan1_2009.cfg
delete
Use this command to remove an image or a CLI configuration file from the switch.
Syntax
delete filename
Parameters
Defaults
None.
Mode
Switch command, read-write.
Usage
Use the dir command (page 3-37) to display current image and configuration file names.
Example
This example shows how to delete the “Jan1_2004.cfg” configuration file:
C3(su)->delete configs/Jan1_2004.cfg
show tftp settings
Use this command to display TFTP settings used by the switch during data transfers using TFTP.
Syntax
show tftp settings
Parameters
None.
Defaults
None.
filename Specifies the local path name to the file. Valid directories are /images and
/configs.
To Next Page
Loading...
Need help?
General